Home

Add

Edit

Without Linenumbers

Code in Textfield


  1. root@data20:/home/tpm# smartctl --all /dev/sda
    
  2. smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (Local build)
    
  3. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
    
  4. 
    
  5. === START OF INFORMATION SECTION ===
    
  6. Device Model:     ST31000524AS
    
  7. Serial Number:    9VPBWD5S
    
  8. Firmware Version: JC45
    
  9. User Capacity:    1.000.204.886.016 bytes
    
  10. Device Is:        Not in smartctl database [for details use: -P showall]
    
  11. ATA Version Is:   8
    
  12. ATA Standard Is:  ATA-8-ACS revision 4
    
  13. Local Time Is:    Sat Jul  9 15:03:52 2011 CEST
    
  14. SMART support Is: Available - device has SMART capability.
    
  15. SMART support Is: Enabled
    
  16. 
    
  17. === START OF Read SMART Data SECTION ===
    
  18. SMART overall-health self-assessment test result: PASSED
    
  19. 
    
  20. General SMART Values:
    
  21. Offline Data collection status:  (0x82) Offline Data collection activity
    
  22.                                         was completed without Error.
    
  23.                                         Auto Offline Data Collection: Enabled.
    
  24. Self-test execution status:      (   0) The previous self-test routine completed
    
  25.                                         without Error Or no self-test has ever
    
  26.                                         been Run.
    
  27. Total Time To complete Offline
    
  28. Data collection:                 ( 600) seconds.
    
  29. Offline Data collection
    
  30. capabilities:                    (0x7b) SMART execute Offline immediate.
    
  31.                                         Auto Offline Data collection on/off support.
    
  32.                                         Suspend Offline collection upon New
    
  33.                                         Command.
    
  34.                                         Offline surface scan supported.
    
  35.                                         Self-test supported.
    
  36.                                         Conveyance Self-test supported.
    
  37.                                         Selective Self-test supported.
    
  38. SMART capabilities:            (0x0003) Saves SMART Data before entering
    
  39.                                         power-saving mode.
    
  40.                                         Supports SMART auto save Timer.
    
  41. Error logging capability:        (0x01) Error logging supported.
    
  42.                                         General Purpose Logging supported.
    
  43. Short self-test routine
    
  44. recommended polling Time:        (   1) minutes.
    
  45. Extended self-test routine
    
  46. recommended polling Time:        ( 171) minutes.
    
  47. Conveyance self-test routine
    
  48. recommended polling Time:        (   2) minutes.
    
  49. SCT capabilities:              (0x103f) SCT Status supported.
    
  50.                                         SCT Error Recovery Control supported.
    
  51.                                         SCT Feature Control supported.
    
  52.                                         SCT Data Table supported.
    
  53. 
    
  54. SMART Attributes Data Structure revision number: 10
    
  55. Vendor Specific SMART Attributes With Thresholds:
    
  56. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH Type      UPDATED  WHEN_FAILED RAW_VALUE
    
  57.   1 Raw_Read_Error_Rate     0x000f   117   100   006    Pre-fail  Always       -       150169914
    
  58.   3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
    
  59.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       29
    
  60.   5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
    
  61.   7 Seek_Error_Rate         0x000f   062   060   030    Pre-fail  Always       -       1761313
    
  62.   9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1716
    
  63.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
    
  64.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       29
    
  65. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
    
  66. 184 End-To-End_Error        0x0032   100   100   099    Old_age   Always       -       0
    
  67. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
    
  68. 188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       1
    
  69. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
    
  70. 190 Airflow_Temperature_Cel 0x0022   061   047   045    Old_age   Always       -       39 (Lifetime Min/Max 38/40)
    
  71. 194 Temperature_Celsius     0x0022   039   053   000    Old_age   Always       -       39 (0 24 0 0)
    
  72. 195 Hardware_ECC_Recovered  0x001a   024   022   000    Old_age   Always       -       150169914
    
  73. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
    
  74. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
    
  75. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    
  76. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       141858474821360
    
  77. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       690836248
    
  78. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1750992578
    
  79. 
    
  80. SMART Error Log Version: 1
    
  81. No Errors Logged
    
  82. 
    
  83. SMART Self-test Log structure revision number 1
    
  84. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    
  85. # 1  Extended offline    Completed without Error       00%      1716         -
    
  86. 
    
  87. SMART Selective self-test Log Data structure revision number 1
    
  88.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    
  89.     1        0        0  Not_testing
    
  90.     2        0        0  Not_testing
    
  91.     3        0        0  Not_testing
    
  92.     4        0        0  Not_testing
    
  93.     5        0        0  Not_testing
    
  94. Selective self-test flags (0x0):
    
  95.   After scanning selected spans, Do Not Read-scan remainder of disk.
    
  96. If Selective self-test Is pending On power-up, Resume after 0 Minute delay.
    
  97. 
    
  98. root@data20:/home/tpm#
    


  1. root@data20:/home/tpm# smartctl --all /dev/sdb
    
  2. smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (Local build)
    
  3. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
    
  4. 
    
  5. === START OF INFORMATION SECTION ===
    
  6. Device Model:     ST31000524AS
    
  7. Serial Number:    9VPBYER8
    
  8. Firmware Version: JC45
    
  9. User Capacity:    1.000.204.886.016 bytes
    
  10. Device Is:        Not in smartctl database [for details use: -P showall]
    
  11. ATA Version Is:   8
    
  12. ATA Standard Is:  ATA-8-ACS revision 4
    
  13. Local Time Is:    Sat Jul  9 15:04:45 2011 CEST
    
  14. SMART support Is: Available - device has SMART capability.
    
  15. SMART support Is: Enabled
    
  16. 
    
  17. === START OF Read SMART Data SECTION ===
    
  18. SMART overall-health self-assessment test result: PASSED
    
  19. 
    
  20. General SMART Values:
    
  21. Offline Data collection status:  (0x82) Offline Data collection activity
    
  22.                                         was completed without Error.
    
  23.                                         Auto Offline Data Collection: Enabled.
    
  24. Self-test execution status:      (   0) The previous self-test routine completed
    
  25.                                         without Error Or no self-test has ever
    
  26.                                         been Run.
    
  27. Total Time To complete Offline
    
  28. Data collection:                 ( 600) seconds.
    
  29. Offline Data collection
    
  30. capabilities:                    (0x7b) SMART execute Offline immediate.
    
  31.                                         Auto Offline Data collection on/off support.
    
  32.                                         Suspend Offline collection upon New
    
  33.                                         Command.
    
  34.                                         Offline surface scan supported.
    
  35.                                         Self-test supported.
    
  36.                                         Conveyance Self-test supported.
    
  37.                                         Selective Self-test supported.
    
  38. SMART capabilities:            (0x0003) Saves SMART Data before entering
    
  39.                                         power-saving mode.
    
  40.                                         Supports SMART auto save Timer.
    
  41. Error logging capability:        (0x01) Error logging supported.
    
  42.                                         General Purpose Logging supported.
    
  43. Short self-test routine
    
  44. recommended polling Time:        (   1) minutes.
    
  45. Extended self-test routine
    
  46. recommended polling Time:        ( 170) minutes.
    
  47. Conveyance self-test routine
    
  48. recommended polling Time:        (   2) minutes.
    
  49. SCT capabilities:              (0x103f) SCT Status supported.
    
  50.                                         SCT Error Recovery Control supported.
    
  51.                                         SCT Feature Control supported.
    
  52.                                         SCT Data Table supported.
    
  53. 
    
  54. SMART Attributes Data Structure revision number: 10
    
  55. Vendor Specific SMART Attributes With Thresholds:
    
  56. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH Type      UPDATED  WHEN_FAILED RAW_VALUE
    
  57.   1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       133513359
    
  58.   3 Spin_Up_Time            0x0003   100   100   000    Pre-fail  Always       -       0
    
  59.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       22
    
  60.   5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
    
  61.   7 Seek_Error_Rate         0x000f   064   060   030    Pre-fail  Always       -       2829097
    
  62.   9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1703
    
  63.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
    
  64.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       22
    
  65. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
    
  66. 184 End-To-End_Error        0x0032   100   100   099    Old_age   Always       -       0
    
  67. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
    
  68. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
    
  69. 189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
    
  70. 190 Airflow_Temperature_Cel 0x0022   061   046   045    Old_age   Always       -       39 (Lifetime Min/Max 38/40)
    
  71. 194 Temperature_Celsius     0x0022   039   054   000    Old_age   Always       -       39 (0 26 0 0)
    
  72. 195 Hardware_ECC_Recovered  0x001a   025   023   000    Old_age   Always       -       133513359
    
  73. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
    
  74. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
    
  75. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    
  76. 240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       89863600735947
    
  77. 241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       3589224590
    
  78. 242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2844563909
    
  79. 
    
  80. SMART Error Log Version: 1
    
  81. No Errors Logged
    
  82. 
    
  83. SMART Self-test Log structure revision number 1
    
  84. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    
  85. # 1  Extended offline    Completed without Error       00%      1703         -
    
  86. 
    
  87. SMART Selective self-test Log Data structure revision number 1
    
  88.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    
  89.     1        0        0  Not_testing
    
  90.     2        0        0  Not_testing
    
  91.     3        0        0  Not_testing
    
  92.     4        0        0  Not_testing
    
  93.     5        0        0  Not_testing
    
  94. Selective self-test flags (0x0):
    
  95.   After scanning selected spans, Do Not Read-scan remainder of disk.
    
  96. If Selective self-test Is pending On power-up, Resume after 0 Minute delay.
    
  97. 
    
  98. root@data20:/home/tpm#
    


  1. root@data20:/home/tpm# smartctl --all /dev/sdc
    
  2. smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (Local build)
    
  3. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
    
  4. 
    
  5. === START OF INFORMATION SECTION ===
    
  6. Model Family:     Hitachi Deskstar 7K1000.C
    
  7. Device Model:     Hitachi HDS721010CLA332
    
  8. Serial Number:    JP2940HD087WVC
    
  9. Firmware Version: JP4OA3EA
    
  10. User Capacity:    1.000.204.886.016 bytes
    
  11. Device Is:        In smartctl database [for details use: -P show]
    
  12. ATA Version Is:   8
    
  13. ATA Standard Is:  ATA-8-ACS revision 4
    
  14. Local Time Is:    Sat Jul  9 15:16:37 2011 CEST
    
  15. SMART support Is: Available - device has SMART capability.
    
  16. SMART support Is: Enabled
    
  17. 
    
  18. === START OF Read SMART Data SECTION ===
    
  19. SMART overall-health self-assessment test result: PASSED
    
  20. 
    
  21. General SMART Values:
    
  22. Offline Data collection status:  (0x85) Offline Data collection activity
    
  23.                                         was aborted by an interrupting Command from host.
    
  24.                                         Auto Offline Data Collection: Enabled.
    
  25. Self-test execution status:      (   0) The previous self-test routine completed
    
  26.                                         without Error Or no self-test has ever
    
  27.                                         been Run.
    
  28. Total Time To complete Offline
    
  29. Data collection:                 (9812) seconds.
    
  30. Offline Data collection
    
  31. capabilities:                    (0x5b) SMART execute Offline immediate.
    
  32.                                         Auto Offline Data collection on/off support.
    
  33.                                         Suspend Offline collection upon New
    
  34.                                         Command.
    
  35.                                         Offline surface scan supported.
    
  36.                                         Self-test supported.
    
  37.                                         No Conveyance Self-test supported.
    
  38.                                         Selective Self-test supported.
    
  39. SMART capabilities:            (0x0003) Saves SMART Data before entering
    
  40.                                         power-saving mode.
    
  41.                                         Supports SMART auto save Timer.
    
  42. Error logging capability:        (0x01) Error logging supported.
    
  43.                                         General Purpose Logging supported.
    
  44. Short self-test routine
    
  45. recommended polling Time:        (   1) minutes.
    
  46. Extended self-test routine
    
  47. recommended polling Time:        ( 164) minutes.
    
  48. SCT capabilities:              (0x003d) SCT Status supported.
    
  49.                                         SCT Error Recovery Control supported.
    
  50.                                         SCT Feature Control supported.
    
  51.                                         SCT Data Table supported.
    
  52. 
    
  53. SMART Attributes Data Structure revision number: 16
    
  54. Vendor Specific SMART Attributes With Thresholds:
    
  55. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH Type      UPDATED  WHEN_FAILED RAW_VALUE
    
  56.   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
    
  57.   2 Throughput_Performance  0x0005   134   134   054    Pre-fail  Offline      -       100
    
  58.   3 Spin_Up_Time            0x0007   163   163   024    Pre-fail  Always       -       194 (Average 271)
    
  59.   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       73
    
  60.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
    
  61.   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
    
  62.   8 Seek_Time_Performance   0x0005   136   136   020    Pre-fail  Offline      -       32
    
  63.   9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       5569
    
  64.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
    
  65.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       73
    
  66. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       259
    
  67. 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       259
    
  68. 194 Temperature_Celsius     0x0002   130   130   000    Old_age   Always       -       46 (Lifetime Min/Max 25/66)
    
  69. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
    
  70. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
    
  71. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
    
  72. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       4423
    
  73. 
    
  74. SMART Error Log Version: 1
    
  75. ATA Error Count: 278 (device Log contains only the most recent five errors)
    
  76.         CR = Command Register [hex]
    
  77.         FR = Features Register [hex]
    
  78.         SC = Sector Count Register [hex]
    
  79.         SN = Sector Number Register [hex]
    
  80.         CL = Cylinder Low Register [hex]
    
  81.         CH = Cylinder High Register [hex]
    
  82.         DH = Device/Head Register [hex]
    
  83.         DC = Device Command Register [hex]
    
  84.         ER = Error register [hex]
    
  85.         ST = Status register [hex]
    
  86. Powered_Up_Time Is measured from power On, And printed As
    
  87. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    
  88. SS=sec, And sss=millisec. It "wraps" after 49.710 days.
    
  89. 
    
  90. Error 278 occurred at disk power-On lifetime: 5532 hours (230 days + 12 hours)
    
  91.   When the Command that caused the Error occurred, the device was active Or idle.
    
  92. 
    
  93.   After Command completion occurred, registers were:
    
  94.   ER ST SC SN CL CH DH
    
  95.   -- -- -- -- -- -- --
    
  96.   84 51 01 16 ff 67 0d  Error: ICRC, ABRT 1 sectors at LBA = 0x0d67ff16 = 224919318
    
  97. 
    
  98.   Commands leading To the Command that caused the Error were:
    
  99.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  100.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  101.   25 00 08 0f ff 67 e0 00  15d+00:54:35.181  Read DMA EXT
    
  102.   b0 d0 01 00 4f c2 00 00  15d+00:54:33.915  SMART Read Data
    
  103.   25 00 08 07 ff 67 e0 00  15d+00:54:33.903  Read DMA EXT
    
  104.   27 00 00 00 00 00 e0 00  15d+00:54:33.901  Read NATIVE MAX ADDRESS EXT
    
  105.   ec 00 00 00 00 00 a0 02  15d+00:54:33.852  IDENTIFY DEVICE
    
  106. 
    
  107. Error 277 occurred at disk power-On lifetime: 5532 hours (230 days + 12 hours)
    
  108.   When the Command that caused the Error occurred, the device was active Or idle.
    
  109. 
    
  110.   After Command completion occurred, registers were:
    
  111.   ER ST SC SN CL CH DH
    
  112.   -- -- -- -- -- -- --
    
  113.   84 51 01 0e ff 67 0d  Error: ICRC, ABRT 1 sectors at LBA = 0x0d67ff0e = 224919310
    
  114. 
    
  115.   Commands leading To the Command that caused the Error were:
    
  116.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  117.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  118.   25 00 08 07 ff 67 ed 00  15d+00:54:31.477  Read DMA EXT
    
  119.   25 00 08 ff fe 67 ed 00  15d+00:54:31.475  Read DMA EXT
    
  120.   25 00 08 f7 fe 67 ed 00  15d+00:54:31.474  Read DMA EXT
    
  121.   25 00 08 ef fe 67 e0 00  15d+00:54:31.457  Read DMA EXT
    
  122.   ec 00 01 00 00 00 00 00  15d+00:54:31.422  IDENTIFY DEVICE
    
  123. 
    
  124. Error 276 occurred at disk power-On lifetime: 5532 hours (230 days + 12 hours)
    
  125.   When the Command that caused the Error occurred, the device was active Or idle.
    
  126. 
    
  127.   After Command completion occurred, registers were:
    
  128.   ER ST SC SN CL CH DH
    
  129.   -- -- -- -- -- -- --
    
  130.   84 51 01 d6 fe 67 0d  Error: ICRC, ABRT 1 sectors at LBA = 0x0d67fed6 = 224919254
    
  131. 
    
  132.   Commands leading To the Command that caused the Error were:
    
  133.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  134.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  135.   25 00 08 cf fe 67 ed 00  15d+00:51:22.170  Read DMA EXT
    
  136.   25 00 08 c7 fe 67 ed 00  15d+00:51:22.167  Read DMA EXT
    
  137.   25 00 08 bf fe 67 e0 00  15d+00:51:22.105  Read DMA EXT
    
  138.   27 00 00 00 00 00 e0 00  15d+00:51:22.103  Read NATIVE MAX ADDRESS EXT
    
  139.   ec 00 00 00 00 00 a0 02  15d+00:51:22.053  IDENTIFY DEVICE
    
  140. 
    
  141. Error 275 occurred at disk power-On lifetime: 5532 hours (230 days + 12 hours)
    
  142.   When the Command that caused the Error occurred, the device was active Or idle.
    
  143. 
    
  144.   After Command completion occurred, registers were:
    
  145.   ER ST SC SN CL CH DH
    
  146.   -- -- -- -- -- -- --
    
  147.   84 51 01 c6 fe 67 0d  Error: ICRC, ABRT 1 sectors at LBA = 0x0d67fec6 = 224919238
    
  148. 
    
  149.   Commands leading To the Command that caused the Error were:
    
  150.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  151.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  152.   25 00 08 bf fe 67 e0 00  15d+00:48:13.041  Read DMA EXT
    
  153.   27 00 00 00 00 00 e0 00  15d+00:48:13.039  Read NATIVE MAX ADDRESS EXT
    
  154.   ec 00 00 00 00 00 a0 02  15d+00:48:12.989  IDENTIFY DEVICE
    
  155.   ef 03 42 00 00 00 a0 02  15d+00:48:12.942  SET FEATURES [set transfer mode]
    
  156.   27 00 00 00 00 00 e0 00  15d+00:48:12.941  Read NATIVE MAX ADDRESS EXT
    
  157. 
    
  158. Error 274 occurred at disk power-On lifetime: 5532 hours (230 days + 12 hours)
    
  159.   When the Command that caused the Error occurred, the device was active Or idle.
    
  160. 
    
  161.   After Command completion occurred, registers were:
    
  162.   ER ST SC SN CL CH DH
    
  163.   -- -- -- -- -- -- --
    
  164.   84 51 01 c6 fe 67 0d  Error: ICRC, ABRT 1 sectors at LBA = 0x0d67fec6 = 224919238
    
  165. 
    
  166.   Commands leading To the Command that caused the Error were:
    
  167.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  168.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  169.   25 00 08 bf fe 67 ed 00  15d+00:48:12.896  Read DMA EXT
    
  170.   25 00 08 b7 fe 67 ed 00  15d+00:41:48.483  Read DMA EXT
    
  171.   25 00 08 af fe 67 ed 00  15d+00:41:48.482  Read DMA EXT
    
  172.   25 00 08 a7 fe 67 ed 00  15d+00:41:48.480  Read DMA EXT
    
  173.   25 00 08 9f fe 67 ed 00  15d+00:41:48.479  Read DMA EXT
    
  174. 
    
  175. SMART Self-test Log structure revision number 1
    
  176. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    
  177. # 1  Extended offline    Completed without Error       00%      5569         -
    
  178. 
    
  179. SMART Selective self-test Log Data structure revision number 1
    
  180.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    
  181.     1        0        0  Not_testing
    
  182.     2        0        0  Not_testing
    
  183.     3        0        0  Not_testing
    
  184.     4        0        0  Not_testing
    
  185.     5        0        0  Not_testing
    
  186. Selective self-test flags (0x0):
    
  187.   After scanning selected spans, Do Not Read-scan remainder of disk.
    
  188. If Selective self-test Is pending On power-up, Resume after 0 Minute delay.
    
  189. 
    
  190. root@data20:/home/tpm#
    


  1. root@data20:/home/tpm# smartctl --all /dev/sdd
    
  2. smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (Local build)
    
  3. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
    
  4. 
    
  5. === START OF INFORMATION SECTION ===
    
  6. Model Family:     Hitachi Deskstar 7K1000.C
    
  7. Device Model:     Hitachi HDS721010CLA332
    
  8. Serial Number:    JP2940HD0889UC
    
  9. Firmware Version: JP4OA3EA
    
  10. User Capacity:    1.000.204.886.016 bytes
    
  11. Device Is:        In smartctl database [for details use: -P show]
    
  12. ATA Version Is:   8
    
  13. ATA Standard Is:  ATA-8-ACS revision 4
    
  14. Local Time Is:    Sat Jul  9 15:06:19 2011 CEST
    
  15. SMART support Is: Available - device has SMART capability.
    
  16. SMART support Is: Enabled
    
  17. 
    
  18. === START OF Read SMART Data SECTION ===
    
  19. SMART overall-health self-assessment test result: PASSED
    
  20. 
    
  21. General SMART Values:
    
  22. Offline Data collection status:  (0x85) Offline Data collection activity
    
  23.                                         was aborted by an interrupting Command from host.
    
  24.                                         Auto Offline Data Collection: Enabled.
    
  25. Self-test execution status:      (   0) The previous self-test routine completed
    
  26.                                         without Error Or no self-test has ever
    
  27.                                         been Run.
    
  28. Total Time To complete Offline
    
  29. Data collection:                 (9694) seconds.
    
  30. Offline Data collection
    
  31. capabilities:                    (0x5b) SMART execute Offline immediate.
    
  32.                                         Auto Offline Data collection on/off support.
    
  33.                                         Suspend Offline collection upon New
    
  34.                                         Command.
    
  35.                                         Offline surface scan supported.
    
  36.                                         Self-test supported.
    
  37.                                         No Conveyance Self-test supported.
    
  38.                                         Selective Self-test supported.
    
  39. SMART capabilities:            (0x0003) Saves SMART Data before entering
    
  40.                                         power-saving mode.
    
  41.                                         Supports SMART auto save Timer.
    
  42. Error logging capability:        (0x01) Error logging supported.
    
  43.                                         General Purpose Logging supported.
    
  44. Short self-test routine
    
  45. recommended polling Time:        (   1) minutes.
    
  46. Extended self-test routine
    
  47. recommended polling Time:        ( 162) minutes.
    
  48. SCT capabilities:              (0x003d) SCT Status supported.
    
  49.                                         SCT Error Recovery Control supported.
    
  50.                                         SCT Feature Control supported.
    
  51.                                         SCT Data Table supported.
    
  52. 
    
  53. SMART Attributes Data Structure revision number: 16
    
  54. Vendor Specific SMART Attributes With Thresholds:
    
  55. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH Type      UPDATED  WHEN_FAILED RAW_VALUE
    
  56.   1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
    
  57.   2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       94
    
  58.   3 Spin_Up_Time            0x0007   160   160   024    Pre-fail  Always       -       199 (Average 275)
    
  59.   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       74
    
  60.   5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
    
  61.   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
    
  62.   8 Seek_Time_Performance   0x0005   138   138   020    Pre-fail  Offline      -       31
    
  63.   9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       5440
    
  64.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
    
  65.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       74
    
  66. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       269
    
  67. 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       269
    
  68. 194 Temperature_Celsius     0x0002   153   153   000    Old_age   Always       -       39 (Lifetime Min/Max 18/51)
    
  69. 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
    
  70. 197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
    
  71. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
    
  72. 199 UDMA_CRC_Error_Count    0x000a   199   199   000    Old_age   Always       -       5876
    
  73. 
    
  74. SMART Error Log Version: 1
    
  75. ATA Error Count: 621 (device Log contains only the most recent five errors)
    
  76.         CR = Command Register [hex]
    
  77.         FR = Features Register [hex]
    
  78.         SC = Sector Count Register [hex]
    
  79.         SN = Sector Number Register [hex]
    
  80.         CL = Cylinder Low Register [hex]
    
  81.         CH = Cylinder High Register [hex]
    
  82.         DH = Device/Head Register [hex]
    
  83.         DC = Device Command Register [hex]
    
  84.         ER = Error register [hex]
    
  85.         ST = Status register [hex]
    
  86. Powered_Up_Time Is measured from power On, And printed As
    
  87. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    
  88. SS=sec, And sss=millisec. It "wraps" after 49.710 days.
    
  89. 
    
  90. Error 621 occurred at disk power-On lifetime: 5428 hours (226 days + 4 hours)
    
  91.   When the Command that caused the Error occurred, the device was active Or idle.
    
  92. 
    
  93.   After Command completion occurred, registers were:
    
  94.   ER ST SC SN CL CH DH
    
  95.   -- -- -- -- -- -- --
    
  96.   84 51 b1 8e b8 3a 03  Error: ICRC, ABRT 177 sectors at LBA = 0x033ab88e = 54179982
    
  97. 
    
  98.   Commands leading To the Command that caused the Error were:
    
  99.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  100.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  101.   25 00 00 3f b8 3a e3 00  38d+10:23:28.015  Read DMA EXT
    
  102.   25 00 00 3f b4 3a e3 00  38d+10:23:27.940  Read DMA EXT
    
  103.   25 00 00 3f b0 3a e0 00  38d+10:23:27.867  Read DMA EXT
    
  104.   ec 00 01 00 00 00 00 00  38d+10:23:27.858  IDENTIFY DEVICE
    
  105.   25 00 80 bf ac 3a e3 00  38d+10:23:27.790  Read DMA EXT
    
  106. 
    
  107. Error 620 occurred at disk power-On lifetime: 5428 hours (226 days + 4 hours)
    
  108.   When the Command that caused the Error occurred, the device was active Or idle.
    
  109. 
    
  110.   After Command completion occurred, registers were:
    
  111.   ER ST SC SN CL CH DH
    
  112.   -- -- -- -- -- -- --
    
  113.   84 51 c1 7e 91 39 03  Error: ICRC, ABRT 193 sectors at LBA = 0x0339917e = 54104446
    
  114. 
    
  115.   Commands leading To the Command that caused the Error were:
    
  116.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  117.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  118.   25 00 00 3f 91 39 e3 00  38d+10:20:12.106  Read DMA EXT
    
  119.   25 00 00 3f 8d 39 e3 00  38d+10:20:12.031  Read DMA EXT
    
  120.   25 00 00 3f 89 39 e3 00  38d+10:20:11.957  Read DMA EXT
    
  121.   25 00 00 3f 85 39 e3 00  38d+10:20:11.882  Read DMA EXT
    
  122.   25 00 00 3f 81 39 e3 00  38d+10:20:11.807  Read DMA EXT
    
  123. 
    
  124. Error 619 occurred at disk power-On lifetime: 5428 hours (226 days + 4 hours)
    
  125.   When the Command that caused the Error occurred, the device was active Or idle.
    
  126. 
    
  127.   After Command completion occurred, registers were:
    
  128.   ER ST SC SN CL CH DH
    
  129.   -- -- -- -- -- -- --
    
  130.   84 51 e1 5e a1 38 03  Error: ICRC, ABRT 225 sectors at LBA = 0x0338a15e = 54042974
    
  131. 
    
  132.   Commands leading To the Command that caused the Error were:
    
  133.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  134.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  135.   25 00 00 3f a1 38 e3 00  38d+10:20:05.254  Read DMA EXT
    
  136.   25 00 00 3f 9d 38 e3 00  38d+10:20:05.180  Read DMA EXT
    
  137.   25 00 00 3f 99 38 e3 00  38d+10:20:05.105  Read DMA EXT
    
  138.   25 00 00 3f 95 38 e3 00  38d+10:20:05.030  Read DMA EXT
    
  139.   25 00 00 3f 91 38 e3 00  38d+10:20:04.956  Read DMA EXT
    
  140. 
    
  141. Error 618 occurred at disk power-On lifetime: 5428 hours (226 days + 4 hours)
    
  142.   When the Command that caused the Error occurred, the device was active Or idle.
    
  143. 
    
  144.   After Command completion occurred, registers were:
    
  145.   ER ST SC SN CL CH DH
    
  146.   -- -- -- -- -- -- --
    
  147.   84 51 b1 8e 6d 37 03  Error: ICRC, ABRT 177 sectors at LBA = 0x03376d8e = 53964174
    
  148. 
    
  149.   Commands leading To the Command that caused the Error were:
    
  150.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  151.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  152.   25 00 00 3f 6d 37 e3 00  38d+10:19:59.344  Read DMA EXT
    
  153.   25 00 00 3f 69 37 e3 00  38d+10:19:59.269  Read DMA EXT
    
  154.   25 00 00 3f 65 37 e3 00  38d+10:19:59.195  Read DMA EXT
    
  155.   25 00 00 3f 61 37 e3 00  38d+10:19:59.120  Read DMA EXT
    
  156.   25 00 00 3f 5d 37 e3 00  38d+10:19:59.045  Read DMA EXT
    
  157. 
    
  158. Error 617 occurred at disk power-On lifetime: 5428 hours (226 days + 4 hours)
    
  159.   When the Command that caused the Error occurred, the device was active Or idle.
    
  160. 
    
  161.   After Command completion occurred, registers were:
    
  162.   ER ST SC SN CL CH DH
    
  163.   -- -- -- -- -- -- --
    
  164.   84 51 b1 8e 59 35 03  Error: ICRC, ABRT 177 sectors at LBA = 0x0335598e = 53827982
    
  165. 
    
  166.   Commands leading To the Command that caused the Error were:
    
  167.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
    
  168.   -- -- -- -- -- -- -- --  ----------------  --------------------
    
  169.   25 00 00 3f 59 35 e3 00  38d+10:19:47.045  Read DMA EXT
    
  170.   25 00 00 3f 55 35 e3 00  38d+10:19:46.970  Read DMA EXT
    
  171.   25 00 00 3f 51 35 e3 00  38d+10:19:46.895  Read DMA EXT
    
  172.   25 00 00 3f 4d 35 e3 00  38d+10:19:46.821  Read DMA EXT
    
  173.   25 00 00 3f 49 35 e3 00  38d+10:19:46.746  Read DMA EXT
    
  174. 
    
  175. SMART Self-test Log structure revision number 1
    
  176. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    
  177. # 1  Extended offline    Completed without Error       00%      5440         -
    
  178. # 2  Extended offline    Interrupted (host Reset)      90%      5428         -
    
  179. 
    
  180. SMART Selective self-test Log Data structure revision number 1
    
  181.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    
  182.     1        0        0  Not_testing
    
  183.     2        0        0  Not_testing
    
  184.     3        0        0  Not_testing
    
  185.     4        0        0  Not_testing
    
  186.     5        0        0  Not_testing
    
  187. Selective self-test flags (0x0):
    
  188.   After scanning selected spans, Do Not Read-scan remainder of disk.
    
  189. If Selective self-test Is pending On power-up, Resume after 0 Minute delay.
    
  190. 
    
  191. root@data20:/home/tpm#
    


  1. root@data20:/home/tpm# fdisk -l
    
  2. 
    
  3. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
    
  4. 255 heads, 63 sectors/track, 121601 cylinders
    
  5. Units = cylinders of 16065 * 512 = 8225280 bytes
    
  6. Sector size (logical/physical): 512 bytes / 512 bytes
    
  7. I/O size (minimum/optimal): 512 bytes / 512 bytes
    
  8. Disk identifier: 0x00000000
    
  9. 
    
  10.    Device Boot      Start         End      Blocks   Id  System
    
  11. /dev/sda1               1      121601   976759008+  fd  Linux raid autodetect
    
  12. 
    
  13. Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
    
  14. 255 heads, 63 sectors/track, 121601 cylinders
    
  15. Units = cylinders of 16065 * 512 = 8225280 bytes
    
  16. Sector size (logical/physical): 512 bytes / 512 bytes
    
  17. I/O size (minimum/optimal): 512 bytes / 512 bytes
    
  18. Disk identifier: 0x00000000
    
  19. 
    
  20.    Device Boot      Start         End      Blocks   Id  System
    
  21. /dev/sdb1               1      121601   976759008+  fd  Linux raid autodetect
    
  22. 
    
  23. Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
    
  24. 255 heads, 63 sectors/track, 121601 cylinders
    
  25. Units = cylinders of 16065 * 512 = 8225280 bytes
    
  26. Sector size (logical/physical): 512 bytes / 512 bytes
    
  27. I/O size (minimum/optimal): 512 bytes / 512 bytes
    
  28. Disk identifier: 0x00000000
    
  29. 
    
  30.    Device Boot      Start         End      Blocks   Id  System
    
  31. /dev/sdc1               1      121601   976760001   fd  Linux raid autodetect
    
  32. 
    
  33. Disk /dev/sde: 20.6 GB, 20576747520 bytes
    
  34. 255 heads, 63 sectors/track, 2501 cylinders
    
  35. Units = cylinders of 16065 * 512 = 8225280 bytes
    
  36. Sector size (logical/physical): 512 bytes / 512 bytes
    
  37. I/O size (minimum/optimal): 512 bytes / 512 bytes
    
  38. Disk identifier: 0x0005d07c
    
  39. 
    
  40.    Device Boot      Start         End      Blocks   Id  System
    
  41. /dev/sde1   *           1        2394    19225600   83  Linux
    
  42. 
    
  43. Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes
    
  44. 255 heads, 63 sectors/track, 121601 cylinders
    
  45. Units = cylinders of 16065 * 512 = 8225280 bytes
    
  46. Sector size (logical/physical): 512 bytes / 512 bytes
    
  47. I/O size (minimum/optimal): 512 bytes / 512 bytes
    
  48. Disk identifier: 0x00000000
    
  49. 
    
  50.    Device Boot      Start         End      Blocks   Id  System
    
  51. /dev/sdd1               1      121601   976760001   fd  Linux raid autodetect
    
  52. 
    
  53. Disk /dev/sdf: 80.0 GB, 80026361856 bytes
    
  54. 255 heads, 63 sectors/track, 9729 cylinders
    
  55. Units = cylinders of 16065 * 512 = 8225280 bytes
    
  56. Sector size (logical/physical): 512 bytes / 512 bytes
    
  57. I/O size (minimum/optimal): 512 bytes / 512 bytes
    
  58. Disk identifier: 0x00000000
    
  59. 
    
  60.    Device Boot      Start         End      Blocks   Id  System
    
  61. /dev/sdf1               1        9729    78148161   83  Linux
    
  62. 
    
  63. Disk /dev/md1: 1000.2 GB, 1000200036352 bytes
    
  64. 2 heads, 4 sectors/track, 244189462 cylinders
    
  65. Units = cylinders of 8 * 512 = 4096 bytes
    
  66. Sector size (logical/physical): 512 bytes / 512 bytes
    
  67. I/O size (minimum/optimal): 512 bytes / 512 bytes
    
  68. Disk identifier: 0x00000000
    
  69. 
    
  70. Disk /dev/md1 doesn't contain a valid partition table
    
  71. root@data20:/home/tpm#
    


  1. root@data20:/home/tpm# cat /etc/mdadm/mdadm.conf
    
  2. # mdadm.conf
    
  3. #
    
  4. # Please refer To mdadm.conf(5) For information about This file.
    
  5. #
    
  6. 
    
  7. # by default, scan all partitions (/proc/partitions) For MD superblocks.
    
  8. # alternatively, specify devices To scan, Using wildcards If desired.
    
  9. # DEVICE
    
  10. 
    
  11. # auto-create devices With Debian standard permissions
    
  12. CREATE owner=root group=disk mode=0660 auto=yes
    
  13. 
    
  14. # automatically tag New arrays As belonging To the Local System
    
  15. HOMEHOST <System>
    
  16. 
    
  17. # instruct the monitoring daemon where To send mail alerts
    
  18. MAILADDR root
    
  19. 
    
  20. # definitions of existing MD arrays
    
  21. 
    
  22. # This file was auto-generated On Sun, 01 May 2011 23:09:09 +0200
    
  23. # by mkconf 3.1.4-1+8efb9d1
    
  24. ARRAY /dev/md0 level=raid1 num-devices=2 metadata=1.2 Name=data20:0 UUID=abc7a67a:b37230d8:e1acc00a:a814ebbe
    
  25. ARRAY /dev/md1 level=raid1 num-devices=2 metadata=1.2 Name=data20:0 UUID=d003e13c:63be8459:495c808c:ddd0b9d8
    
  26. 
    
  27. root@data20:/home/tpm#
    


  1. root@data20:/home/tpm# dmesg
    
  2. [    0.000000] Initializing cgroup subsys cpuset
    
  3. [    0.000000] Initializing cgroup subsys cpu
    
  4. [    0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Mar 8 21:36:00 UTC 2011
    
  5. [    0.000000] KERNEL supported cpus:
    
  6. [    0.000000]   Intel GenuineIntel
    
  7. [    0.000000]   AMD AuthenticAMD
    
  8. [    0.000000]   NSC Geode by NSC
    
  9. [    0.000000]   Cyrix CyrixInstead
    
  10. [    0.000000]   Centaur CentaurHauls
    
  11. [    0.000000]   Transmeta GenuineTMx86
    
  12. [    0.000000]   Transmeta TransmetaCPU
    
  13. [    0.000000]   UMC UMC UMC UMC
    
  14. [    0.000000] BIOS-provided physical RAM map:
    
  15. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    
  16. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    
  17. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    
  18. [    0.000000]  BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
    
  19. [    0.000000]  BIOS-e820: 000000005fff0000 - 000000005fff8000 (ACPI Data)
    
  20. [    0.000000]  BIOS-e820: 000000005fff8000 - 0000000060000000 (ACPI NVS)
    
  21. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    
  22. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    
  23. [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    
  24. [    0.000000] DMI 2.3 present.
    
  25. [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    
  26. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    
  27. [    0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000
    
  28. [    0.000000] MTRR default Type: uncachable
    
  29. [    0.000000] MTRR fixed ranges enabled:
    
  30. [    0.000000]   00000-9FFFF Write-back
    
  31. [    0.000000]   A0000-BFFFF uncachable
    
  32. [    0.000000]   C0000-C7FFF Write-protect
    
  33. [    0.000000]   C8000-EFFFF uncachable
    
  34. [    0.000000]   F0000-FFFFF Write-protect
    
  35. [    0.000000] MTRR variable ranges enabled:
    
  36. [    0.000000]   0 Base 000000000 mask FC0000000 Write-back
    
  37. [    0.000000]   1 Base 040000000 mask FE0000000 Write-back
    
  38. [    0.000000]   2 disabled
    
  39. [    0.000000]   3 disabled
    
  40. [    0.000000]   4 disabled
    
  41. [    0.000000]   5 Base 0E0000000 mask FFC000000 Write-combining
    
  42. [    0.000000]   6 disabled
    
  43. [    0.000000]   7 disabled
    
  44. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, New 0x7010600070106
    
  45. [    0.000000] initial memory mapped : 0 - 01800000
    
  46. [    0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
    
  47. [    0.000000]  0000000000 - 0000400000 page 4k
    
  48. [    0.000000]  0000400000 - 0037000000 page 2M
    
  49. [    0.000000]  0037000000 - 00373fe000 page 4k
    
  50. [    0.000000] kernel direct mapping tables up To 373fe000 @ 10000-16000
    
  51. [    0.000000] RAMDISK: 37774000 - 37fefb8f
    
  52. [    0.000000] Allocated New RAMDISK: 00100000 - 0097bb8f
    
  53. [    0.000000] Move RAMDISK from 0000000037774000 - 0000000037fefb8e To 00100000 - 0097bb8e
    
  54. [    0.000000] ACPI: RSDP 000fa510 00014 (v00 AMI   )
    
  55. [    0.000000] ACPI: RSDT 5fff0000 0002C (v01 AMIINT VIA_K7   00000010 MSFT 00000097)
    
  56. [    0.000000] ACPI: FACP 5fff0030 00081 (v01 AMIINT VIA_K7   00000011 MSFT 00000097)
    
  57. [    0.000000] ACPI: DSDT 5fff0120 0315C (v01    VIA   VIA_K7 00001000 MSFT 0100000D)
    
  58. [    0.000000] ACPI: FACS 5fff8000 00040
    
  59. [    0.000000] ACPI: APIC 5fff00c0 00054 (v01 AMIINT VIA_K7   00000009 MSFT 00000097)
    
  60. [    0.000000] ACPI: Local APIC address 0xfee00000
    
  61. [    0.000000] 651MB HIGHMEM available.
    
  62. [    0.000000] 883MB LOWMEM available.
    
  63. [    0.000000]   mapped low ram: 0 - 373fe000
    
  64. [    0.000000]   low ram: 0 - 373fe000
    
  65. [    0.000000]   node 0 low ram: 00000000 - 373fe000
    
  66. [    0.000000]   node 0 bootmap 00012000 - 00018e80
    
  67. [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
    
  68. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS Data page ==> [0000000000 - 0000001000]
    
  69. [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
    
  70. [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
    
  71. [    0.000000]   #3 [0001000000 - 00014cabb4]    TEXT Data BSS ==> [0001000000 - 00014cabb4]
    
  72. [    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
    
  73. [    0.000000]   #5 [00014cb000 - 00014d1294]              BRK ==> [00014cb000 - 00014d1294]
    
  74. [    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
    
  75. [    0.000000]   #7 [0000100000 - 000097bb8f]      New RAMDISK ==> [0000100000 - 000097bb8f]
    
  76. [    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
    
  77. [    0.000000] found SMP MP-table at [c00fb880] fb880
    
  78. [    0.000000] Zone PFN ranges:
    
  79. [    0.000000]   DMA      0x00000010 -> 0x00001000
    
  80. [    0.000000]   Normal   0x00001000 -> 0x000373fe
    
  81. [    0.000000]   HighMem  0x000373fe -> 0x0005fff0
    
  82. [    0.000000] Movable zone start PFN For each node
    
  83. [    0.000000] early_node_map[2] active PFN ranges
    
  84. [    0.000000]     0: 0x00000010 -> 0x0000009f
    
  85. [    0.000000]     0: 0x00000100 -> 0x0005fff0
    
  86. [    0.000000] On node 0 totalpages: 393087
    
  87. [    0.000000] free_area_init_node: node 0, pgdat c13b28a0, node_mem_map c14d3200
    
  88. [    0.000000]   DMA zone: 32 pages used For memmap
    
  89. [    0.000000]   DMA zone: 0 pages reserved
    
  90. [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
    
  91. [    0.000000]   Normal zone: 1736 pages used For memmap
    
  92. [    0.000000]   Normal zone: 220470 pages, LIFO batch:31
    
  93. [    0.000000]   HighMem zone: 1304 pages used For memmap
    
  94. [    0.000000]   HighMem zone: 165594 pages, LIFO batch:31
    
  95. [    0.000000] Using APIC driver default
    
  96. [    0.000000] ACPI: PM-Timer IO Port: 0x808
    
  97. [    0.000000] ACPI: Local APIC address 0xfee00000
    
  98. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    
  99. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    
  100. [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    
  101. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    
  102. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    
  103. [    0.000000] ACPI: IRQ0 used by override.
    
  104. [    0.000000] ACPI: IRQ2 used by override.
    
  105. [    0.000000] ACPI: IRQ9 used by override.
    
  106. [    0.000000] Using ACPI (MADT) For SMP configuration information
    
  107. [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
    
  108. [    0.000000] nr_irqs_gsi: 24
    
  109. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    
  110. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    
  111. [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    
  112. [    0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
    
  113. [    0.000000] Booting paravirtualized kernel On bare hardware
    
  114. [    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
    
  115. [    0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s34328 r0 d23016 u4194304
    
  116. [    0.000000] pcpu-alloc: s34328 r0 d23016 u4194304 alloc=1*4194304
    
  117. [    0.000000] pcpu-alloc: [0] 0
    
  118. [    0.000000] Built 1 zonelists in Zone order, mobility grouping On.  Total pages: 390015
    
  119. [    0.000000] Kernel Command Line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=7f2be9e6-0302-4e71-beb9-25798ad5eb1f ro quiet
    
  120. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    
  121. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    
  122. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    
  123. [    0.000000] Enabling fast FPU save And Restore... done.
    
  124. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    
  125. [    0.000000] Initializing CPU#0
    
  126. [    0.000000] Initializing HighMem For node 0 (000373fe:0005fff0)
    
  127. [    0.000000] Memory: 1544616k/1572800k available (2503k kernel code, 26824k reserved, 1321k Data, 380k init, 667592k highmem)
    
  128. [    0.000000] virtual kernel memory layout:
    
  129. [    0.000000]     fixmap  : 0xffd56000 - 0xfffff000   (2724 kB)
    
  130. [    0.000000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    
  131. [    0.000000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
    
  132. [    0.000000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
    
  133. [    0.000000]       .init : 0xc13bd000 - 0xc141c000   ( 380 kB)
    
  134. [    0.000000]       .Data : 0xc1271cc1 - 0xc13bc4c0   (1321 kB)
    
  135. [    0.000000]       .text : 0xc1000000 - 0xc1271cc1   (2503 kB)
    
  136. [    0.000000] Checking If This processor honours the WP Bit even in supervisor mode...Ok.
    
  137. [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    
  138. [    0.000000] Hierarchical RCU implementation.
    
  139. [    0.000000] NR_IRQS:1280
    
  140. [    0.000000] Console: colour VGA+ 80x25
    
  141. [    0.000000] console [tty0] enabled
    
  142. [    0.000000] Fast TSC calibration Using PIT
    
  143. [    0.000000] Detected 1150.063 MHz processor.
    
  144. [    0.004010] Calibrating delay Loop (skipped), value calculated Using Timer frequency.. 2300.12 BogoMIPS (lpj=4600252)
    
  145. [    0.004058] Security Framework initialized
    
  146. [    0.004074] SELinux:  Disabled at boot.
    
  147. [    0.004090] Mount-cache hash table entries: 512
    
  148. [    0.004393] Initializing cgroup subsys ns
    
  149. [    0.004402] Initializing cgroup subsys cpuacct
    
  150. [    0.004411] Initializing cgroup subsys devices
    
  151. [    0.004417] Initializing cgroup subsys freezer
    
  152. [    0.004422] Initializing cgroup subsys net_cls
    
  153. [    0.004476] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    
  154. [    0.004482] CPU: L2 Cache: 256K (64 bytes/line)
    
  155. [    0.004491] mce: CPU supports 4 MCE banks
    
  156. [    0.004535] Performance Events: AMD PMU driver.
    
  157. [    0.004549] ... version:                0
    
  158. [    0.004553] ... Bit Width:              48
    
  159. [    0.004557] ... generic registers:      4
    
  160. [    0.004561] ... value mask:             0000ffffffffffff
    
  161. [    0.004565] ... max period:             00007fffffffffff
    
  162. [    0.004569] ... fixed-purpose events:   0
    
  163. [    0.004573] ... event mask:             000000000000000f
    
  164. [    0.004582] Checking 'hlt' instruction... OK.
    
  165. [    0.020502] SMP alternatives: switching To UP code
    
  166. [    0.026653] Freeing SMP alternatives: 13k freed
    
  167. [    0.026689] ACPI: Core revision 20090903
    
  168. [    0.033946] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    
  169. [    0.035289] ..Timer: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    
  170. [    0.074982] CPU0: AMD Athlon(tm) Processor stepping 02
    
  171. [    0.076001] Brought up 1 CPUs
    
  172. [    0.076001] Total of 1 processors activated (2300.12 BogoMIPS).
    
  173. [    0.076001] CPU0 attaching NULL sched-domain.
    
  174. [    0.076001] devtmpfs: initialized
    
  175. [    0.076001] regulator: core version 0.5
    
  176. [    0.076001] NET: Registered protocol family 16
    
  177. [    0.076001] ACPI: bus Type pci registered
    
  178. [    0.076125] PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
    
  179. [    0.076131] PCI: Using configuration Type 1 For Base Access
    
  180. [    0.076899] bio: create slab <bio-0> at 0
    
  181. [    0.077654] ACPI: EC: Look up EC in DSDT
    
  182. [    0.085619] ACPI: Interpreter enabled
    
  183. [    0.085628] ACPI: (supports S0 S1 S4 S5)
    
  184. [    0.085665] ACPI: Using IOAPIC For interrupt routing
    
  185. [    0.091900] ACPI: Power Resource [urp1] (off)
    
  186. [    0.091953] ACPI: Power Resource [urp2] (off)
    
  187. [    0.092015] ACPI: Power Resource [fddp] (off)
    
  188. [    0.092069] ACPI: Power Resource [lptp] (off)
    
  189. [    0.092272] ACPI: No dock devices found.
    
  190. [    0.092502] ACPI: PCI Root Bridge [pci0] (0000:00)
    
  191. [    0.092592] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff]
    
  192. [    0.092712] pci 0000:00:01.0: supports D1
    
  193. [    0.092760] pci 0000:00:07.0: reg 10 io port: [0xec00-0xec07]
    
  194. [    0.092771] pci 0000:00:07.0: reg 14 io port: [0xe800-0xe803]
    
  195. [    0.092781] pci 0000:00:07.0: reg 18 io port: [0xe400-0xe407]
    
  196. [    0.092791] pci 0000:00:07.0: reg 1c io port: [0xe000-0xe003]
    
  197. [    0.092801] pci 0000:00:07.0: reg 20 io port: [0xdc00-0xdc0f]
    
  198. [    0.092811] pci 0000:00:07.0: reg 24 32bit mmio: [0xdffffe00-0xdfffffff]
    
  199. [    0.092822] pci 0000:00:07.0: reg 30 32bit mmio pref: [0xdff00000-0xdff7ffff]
    
  200. [    0.092844] pci 0000:00:07.0: supports D1 D2
    
  201. [    0.092885] pci 0000:00:08.0: reg 10 io port: [0xd800-0xd807]
    
  202. [    0.092895] pci 0000:00:08.0: reg 14 io port: [0xd400-0xd403]
    
  203. [    0.092905] pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
    
  204. [    0.092915] pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
    
  205. [    0.092925] pci 0000:00:08.0: reg 20 io port: [0xc800-0xc80f]
    
  206. [    0.092936] pci 0000:00:08.0: reg 24 32bit mmio: [0xdffffc00-0xdffffdff]
    
  207. [    0.092947] pci 0000:00:08.0: reg 30 32bit mmio pref: [0xdfe80000-0xdfefffff]
    
  208. [    0.092968] pci 0000:00:08.0: supports D1 D2
    
  209. [    0.093010] pci 0000:00:09.0: reg 10 io port: [0xc400-0xc4ff]
    
  210. [    0.093021] pci 0000:00:09.0: reg 14 32bit mmio: [0xdffffb00-0xdffffbff]
    
  211. [    0.093049] pci 0000:00:09.0: reg 30 32bit mmio pref: [0xdffd0000-0xdffdffff]
    
  212. [    0.093071] pci 0000:00:09.0: supports D1 D2
    
  213. [    0.093076] pci 0000:00:09.0: PME# supported from D1 D2 D3hot
    
  214. [    0.093084] pci 0000:00:09.0: PME# disabled
    
  215. [    0.093238] pci 0000:00:11.1: reg 20 io port: [0xfc00-0xfc0f]
    
  216. [    0.093325] pci 0000:00:11.2: reg 20 io port: [0xb400-0xb41f]
    
  217. [    0.093410] pci 0000:00:11.3: reg 20 io port: [0xb800-0xb81f]
    
  218. [    0.093494] pci 0000:00:11.4: reg 20 io port: [0xbc00-0xbc1f]
    
  219. [    0.093562] pci 0000:00:11.5: reg 10 io port: [0xc000-0xc0ff]
    
  220. [    0.093676] pci 0000:01:00.0: reg 10 32bit mmio: [0xde000000-0xdeffffff]
    
  221. [    0.093686] pci 0000:01:00.0: reg 14 io port: [0x6800-0x68ff]
    
  222. [    0.093696] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfcff000-0xdfcfffff]
    
  223. [    0.093718] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfcc0000-0xdfcdffff]
    
  224. [    0.093781] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff]
    
  225. [    0.093788] pci 0000:00:01.0: bridge 32bit mmio: [0xddc00000-0xdfcfffff]
    
  226. [    0.093796] pci 0000:00:01.0: bridge 32bit mmio pref: [0xdda00000-0xddafffff]
    
  227. [    0.093808] pci_bus 0000:00: On NUMA node 0
    
  228. [    0.093817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    
  229. [    0.114976] ACPI: PCI Interrupt Link [lnka] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    
  230. [    0.115150] ACPI: PCI Interrupt Link [lnkb] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    
  231. [    0.115321] ACPI: PCI Interrupt Link [lnkc] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    
  232. [    0.115490] ACPI: PCI Interrupt Link [lnkd] (IRQs 3 4 5 6 7 10 11 *12 14 15)
    
  233. [    0.115712] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    
  234. [    0.115718] vgaarb: loaded
    
  235. [    0.115921] PCI: Using ACPI For IRQ routing
    
  236. [    0.116221] Switching To clocksource tsc
    
  237. [    0.118844] pnp: PnP ACPI init
    
  238. [    0.118897] ACPI: bus Type pnp registered
    
  239. [    0.123647] pnp: PnP ACPI: found 11 devices
    
  240. [    0.123652] ACPI: ACPI bus Type pnp unregistered
    
  241. [    0.123662] PnPBIOS: Disabled by ACPI PNP
    
  242. [    0.158714] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    
  243. [    0.158721] pci 0000:00:01.0:   IO Window: 0x6000-0x6fff
    
  244. [    0.158731] pci 0000:00:01.0:   MEM Window: 0xddc00000-0xdfcfffff
    
  245. [    0.158739] pci 0000:00:01.0:   PREFETCH Window: 0xdda00000-0xddafffff
    
  246. [    0.158763] pci 0000:00:01.0: setting latency Timer To 64
    
  247. [    0.158773] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
    
  248. [    0.158779] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    
  249. [    0.158786] pci_bus 0000:01: resource 0 io:  [0x6000-0x6fff]
    
  250. [    0.158792] pci_bus 0000:01: resource 1 mem: [0xddc00000-0xdfcfffff]
    
  251. [    0.158798] pci_bus 0000:01: resource 2 pref mem [0xdda00000-0xddafffff]
    
  252. [    0.158880] NET: Registered protocol family 2
    
  253. [    0.159073] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    
  254. [    0.159951] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    
  255. [    0.163003] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    
  256. [    0.164520] TCP: Hash tables configured (established 131072 bind 65536)
    
  257. [    0.164528] TCP reno registered
    
  258. [    0.164767] NET: Registered protocol family 1
    
  259. [    0.164809] pci 0000:00:01.0: disabling DAC On VIA PCI bridge
    
  260. [    0.164881] pci 0000:01:00.0: Boot video device
    
  261. [    0.165011] Unpacking initramfs...
    
  262. [    0.612519] Freeing initrd memory: 8686k freed
    
  263. [    0.635180] audit: initializing netlink socket (disabled)
    
  264. [    0.635213] Type=2000 audit(1310205868.631:1): initialized
    
  265. [    0.641416] highmem bounce pool size: 64 pages
    
  266. [    0.641428] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    
  267. [    0.644480] VFS: Disk quotas dquot_6.5.2
    
  268. [    0.644602] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    
  269. [    0.644774] msgmni has been set To 1731
    
  270. [    0.645192] alg: No test For stdrng (krng)
    
  271. [    0.645248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    
  272. [    0.645256] io scheduler noop registered
    
  273. [    0.645260] io scheduler anticipatory registered
    
  274. [    0.645265] io scheduler deadline registered
    
  275. [    0.645333] io scheduler cfq registered (default)
    
  276. [    0.645696] isapnp: Scanning For PnP cards...
    
  277. [    0.999258] isapnp: No Plug & Play device found
    
  278. [    1.002184] Linux agpgart interface v0.103
    
  279. [    1.002405] agpgart: Detected VIA KT266/KY266x/KT333 chipset
    
  280. [    1.008313] agpgart-via 0000:00:00.0: AGP aperture Is 64M @ 0xe0000000
    
  281. [    1.008364] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    
  282. [    1.008514] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) Is a 16550A
    
  283. [    1.008651] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) Is a 16550A
    
  284. [    1.009057] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) Is a 16550A
    
  285. [    1.009237] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) Is a 16550A
    
  286. [    1.009581] PNP: PS/2 Controller [pnp0303:PS2K] at 0x60,0x64 irq 1
    
  287. [    1.009586] PNP: PS/2 appears To have AUX port disabled, If This Is incorrect please boot With i8042.nopnp
    
  288. [    1.010326] serio: i8042 KBD port at 0x60,0x64 irq 1
    
  289. [    1.010510] mice: PS/2 mouse device Common For all mice
    
  290. [    1.010612] rtc_cmos 00:07: RTC can wake from S4
    
  291. [    1.010710] rtc_cmos 00:07: rtc core: registered rtc_cmos As rtc0
    
  292. [    1.010766] rtc0: alarms up To one year, y3k, 114 bytes nvram
    
  293. [    1.010789] cpuidle: Using governor ladder
    
  294. [    1.010793] cpuidle: Using governor menu
    
  295. [    1.010803] No iBFT detected.
    
  296. [    1.011645] TCP cubic registered
    
  297. [    1.011981] NET: Registered protocol family 10
    
  298. [    1.013701] Mobile IPv6
    
  299. [    1.013708] NET: Registered protocol family 17
    
  300. [    1.013745] Using IPI No-Shortcut mode
    
  301. [    1.013901] PM: Resume from disk failed.
    
  302. [    1.013936] registered taskstats version 1
    
  303. [    1.014358] rtc_cmos 00:07: setting System clock To 2011-07-09 10:04:29 UTC (1310205869)
    
  304. [    1.014428] Initalizing network drop monitor service
    
  305. [    1.014494] Freeing unused kernel memory: 380k freed
    
  306. [    1.015450] Write protecting the kernel text: 2504k
    
  307. [    1.015492] Write protecting the kernel Read-only Data: 920k
    
  308. [    1.025778] Input: AT Translated Set 2 keyboard As /devices/platform/i8042/serio0/input/input0
    
  309. [    1.064043] udev[46]: starting version 164
    
  310. [    1.422592] SCSI subsystem initialized
    
  311. [    1.474881] libata version 3.00 loaded.
    
  312. [    1.487527] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    
  313. [    1.487597] r8169 0000:00:09.0: PCI Int A -> GSI 16 (level, low) -> IRQ 16
    
  314. [    1.487657] r8169 0000:00:09.0: no PCI Express capability
    
  315. [    1.489345] eth0: RTL8110s at 0xf7dc6b00, 00:50:fc:fe:8d:33, XID 04000000 IRQ 16
    
  316. [    1.520350] usbcore: registered New interface driver usbfs
    
  317. [    1.520670] usbcore: registered New interface driver hub
    
  318. [    1.528986] Floppy drive(s): fd0 Is 1.44M
    
  319. [    1.529968] usbcore: registered New device driver usb
    
  320. [    1.534686] sata_sil 0000:00:07.0: version 2.4
    
  321. [    1.534804] sata_sil 0000:00:07.0: PCI Int A -> GSI 18 (level, low) -> IRQ 18
    
  322. [    1.543026] scsi0 : sata_sil
    
  323. [    1.544151] scsi1 : sata_sil
    
  324. [    1.544432] ata1: SATA max UDMA/100 mmio m512@0xdffffe00 tf 0xdffffe80 irq 18
    
  325. [    1.544440] ata2: SATA max UDMA/100 mmio m512@0xdffffe00 tf 0xdffffec0 irq 18
    
  326. [    1.544582] sata_sil 0000:00:08.0: PCI Int A -> GSI 19 (level, low) -> IRQ 19
    
  327. [    1.544833] scsi2 : sata_sil
    
  328. [    1.546246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    
  329. [    1.547878] FDC 0 Is a post-1991 82077
    
  330. [    1.547939] scsi3 : sata_sil
    
  331. [    1.548138] ata3: SATA max UDMA/100 mmio m512@0xdffffc00 tf 0xdffffc80 irq 19
    
  332. [    1.548146] ata4: SATA max UDMA/100 mmio m512@0xdffffc00 tf 0xdffffcc0 irq 19
    
  333. [    1.574764] pata_via 0000:00:11.1: version 0.3.4
    
  334. [    1.575167] scsi4 : pata_via
    
  335. [    1.575491] scsi5 : pata_via
    
  336. [    1.579515] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
    
  337. [    1.579524] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
    
  338. [    1.627245] uhci_hcd: USB Universal Host Controller Interface driver
    
  339. [    1.627396] uhci_hcd 0000:00:11.2: PCI Int D -> GSI 12 (level, low) -> IRQ 12
    
  340. [    1.627417] uhci_hcd 0000:00:11.2: UHCI Host Controller
    
  341. [    1.627488] uhci_hcd 0000:00:11.2: New USB bus registered, assigned bus number 1
    
  342. [    1.627553] uhci_hcd 0000:00:11.2: irq 12, io Base 0x0000b400
    
  343. [    1.627653] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    
  344. [    1.627660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    
  345. [    1.627667] usb usb1: Product: UHCI Host Controller
    
  346. [    1.627671] usb usb1: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
    
  347. [    1.627676] usb usb1: SerialNumber: 0000:00:11.2
    
  348. [    1.628119] usb usb1: configuration #1 chosen from 1 choice
    
  349. [    1.628274] hub 1-0:1.0: USB hub found
    
  350. [    1.628301] hub 1-0:1.0: 2 ports detected
    
  351. [    1.628423] uhci_hcd 0000:00:11.3: PCI Int D -> GSI 12 (level, low) -> IRQ 12
    
  352. [    1.628441] uhci_hcd 0000:00:11.3: UHCI Host Controller
    
  353. [    1.628460] uhci_hcd 0000:00:11.3: New USB bus registered, assigned bus number 2
    
  354. [    1.628495] uhci_hcd 0000:00:11.3: irq 12, io Base 0x0000b800
    
  355. [    1.628573] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    
  356. [    1.628580] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    
  357. [    1.628586] usb usb2: Product: UHCI Host Controller
    
  358. [    1.628590] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
    
  359. [    1.628595] usb usb2: SerialNumber: 0000:00:11.3
    
  360. [    1.628826] usb usb2: configuration #1 chosen from 1 choice
    
  361. [    1.629340] hub 2-0:1.0: USB hub found
    
  362. [    1.629368] hub 2-0:1.0: 2 ports detected
    
  363. [    1.629488] uhci_hcd 0000:00:11.4: PCI Int D -> GSI 12 (level, low) -> IRQ 12
    
  364. [    1.629506] uhci_hcd 0000:00:11.4: UHCI Host Controller
    
  365. [    1.629534] uhci_hcd 0000:00:11.4: New USB bus registered, assigned bus number 3
    
  366. [    1.629572] uhci_hcd 0000:00:11.4: irq 12, io Base 0x0000bc00
    
  367. [    1.629656] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    
  368. [    1.629662] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    
  369. [    1.629668] usb usb3: Product: UHCI Host Controller
    
  370. [    1.629673] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
    
  371. [    1.629678] usb usb3: SerialNumber: 0000:00:11.4
    
  372. [    1.629937] usb usb3: configuration #1 chosen from 1 choice
    
  373. [    1.630082] hub 3-0:1.0: USB hub found
    
  374. [    1.630103] hub 3-0:1.0: 2 ports detected
    
  375. [    1.752731] ata5.00: ATA-5: IC35L020AVVN07-0, VA1OAF0C, max UDMA/100
    
  376. [    1.752741] ata5.00: 40188960 sectors, multi 16: LBA
    
  377. [    1.776627] ata5.00: configured For UDMA/100
    
  378. [    1.864032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    
  379. [    1.872034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    
  380. [    1.872547] ata1.00: ATA-8: ST31000524AS, JC45, max UDMA/133
    
  381. [    1.872554] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    
  382. [    1.880388] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
    
  383. [    1.880396] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    
  384. [    1.888534] ata1.00: configured For UDMA/100
    
  385. [    1.888792] scsi 0:0:0:0: Direct-Access     ATA      ST31000524AS     JC45 PQ: 0 ANSI: 5
    
  386. [    1.896500] ata3.00: configured For UDMA/100
    
  387. [    2.208036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    
  388. [    2.216405] ata2.00: ATA-8: ST31000524AS, JC45, max UDMA/133
    
  389. [    2.216413] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    
  390. [    2.232427] ata2.00: configured For UDMA/100
    
  391. [    2.232700] scsi 1:0:0:0: Direct-Access     ATA      ST31000524AS     JC45 PQ: 0 ANSI: 5
    
  392. [    2.233788] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
    
  393. [    2.248209] sd 0:0:0:0: [sda] 1953525168 512-Byte logical blocks: (1.00 TB/931 GiB)
    
  394. [    2.248327] sd 0:0:0:0: [sda] Write Protect Is off
    
  395. [    2.248335] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    
  396. [    2.248386] sd 0:0:0:0: [sda] Write cache: enabled, Read cache: enabled, doesn't support DPO or FUA
    
  397. [    2.248695]  sda:
    
  398. [    2.249091] sd 1:0:0:0: [sdb] 1953525168 512-Byte logical blocks: (1.00 TB/931 GiB)
    
  399. [    2.249197] sd 1:0:0:0: [sdb] Write Protect Is off
    
  400. [    2.249204] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    
  401. [    2.249252] sd 1:0:0:0: [sdb] Write cache: enabled, Read cache: enabled, doesn't support DPO or FUA
    
  402. [    2.249514]  sdb:
    
  403. [    2.249834] sd 2:0:0:0: [sdc] 1953525168 512-Byte logical blocks: (1.00 TB/931 GiB)
    
  404. [    2.249940] sd 2:0:0:0: [sdc] Write Protect Is off
    
  405. [    2.249947] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    
  406. [    2.249995] sd 2:0:0:0: [sdc] Write cache: enabled, Read cache: enabled, doesn't support DPO or FUA
    
  407. [    2.250276]  sdc: sda1
    
  408. [    2.268380] sd 0:0:0:0: [sda] Attached SCSI disk
    
  409. [    2.270582]  sdc1
    
  410. [    2.271764] sd 2:0:0:0: [sdc] Attached SCSI disk
    
  411. [    2.273389]  sdb1
    
  412. [    2.274617] sd 1:0:0:0: [sdb] Attached SCSI disk
    
  413. [    2.556039] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    
  414. [    2.564389] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
    
  415. [    2.564397] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    
  416. [    2.580388] ata4.00: configured For UDMA/100
    
  417. [    2.580599] scsi 3:0:0:0: Direct-Access     ATA      Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
    
  418. [    2.581146] scsi 4:0:0:0: Direct-Access     ATA      IC35L020AVVN07-0 VA1O PQ: 0 ANSI: 5
    
  419. [    2.581612] sd 4:0:0:0: [sde] 40188960 512-Byte logical blocks: (20.5 GB/19.1 GiB)
    
  420. [    2.581724] sd 4:0:0:0: [sde] Write Protect Is off
    
  421. [    2.581731] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
    
  422. [    2.582297] sd 4:0:0:0: [sde] Write cache: enabled, Read cache: enabled, doesn't support DPO or FUA
    
  423. [    2.582504] sd 3:0:0:0: [sdd] 1953525168 512-Byte logical blocks: (1.00 TB/931 GiB)
    
  424. [    2.582627] sd 3:0:0:0: [sdd] Write Protect Is off
    
  425. [    2.582634] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
    
  426. [    2.582725] sd 3:0:0:0: [sdd] Write cache: enabled, Read cache: enabled, doesn't support DPO or FUA
    
  427. [    2.582915]  sde:
    
  428. [    2.583214]  sdd: sdd1
    
  429. [    2.600902] sd 3:0:0:0: [sdd] Attached SCSI disk
    
  430. [    2.601035]  sde1
    
  431. [    2.602211] sd 4:0:0:0: [sde] Attached SCSI disk
    
  432. [    2.800581] ata6.00: ATA-6: ST380011A, 3.06, max UDMA/100
    
  433. [    2.800589] ata6.00: 156301488 sectors, multi 16: LBA48
    
  434. [    2.816464] ata6.00: configured For UDMA/100
    
  435. [    2.816665] scsi 5:0:0:0: Direct-Access     ATA      ST380011A        3.06 PQ: 0 ANSI: 5
    
  436. [    2.817140] sd 5:0:0:0: [sdf] 156301488 512-Byte logical blocks: (80.0 GB/74.5 GiB)
    
  437. [    2.817254] sd 5:0:0:0: [sdf] Write Protect Is off
    
  438. [    2.817261] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
    
  439. [    2.817664] sd 5:0:0:0: [sdf] Write cache: enabled, Read cache: enabled, doesn't support DPO or FUA
    
  440. [    2.817956]  sdf: sdf1
    
  441. [    2.822308] sd 5:0:0:0: [sdf] Attached SCSI disk
    
  442. [    3.185424] md: linear personality registered For level -1
    
  443. [    3.192152] md: multipath personality registered For level -4
    
  444. [    3.197884] md: raid0 personality registered For level 0
    
  445. [    3.207515] md: raid1 personality registered For level 1
    
  446. [    3.212769] async_tx: api initialized (async)
    
  447. [    3.215812] Xor: automatically Using best checksumming Function: pIII_sse
    
  448. [    3.232010]    pIII_sse  :  1389.000 MB/sec
    
  449. [    3.232015] Xor: Using Function: pIII_sse (1389.000 MB/sec)
    
  450. [    3.304115] raid6: int32x1    473 MB/s
    
  451. [    3.372065] raid6: int32x2    500 MB/s
    
  452. [    3.440049] raid6: int32x4    421 MB/s
    
  453. [    3.508193] raid6: int32x8    332 MB/s
    
  454. [    3.576012] raid6: mmxx1      929 MB/s
    
  455. [    3.644024] raid6: mmxx2     1571 MB/s
    
  456. [    3.712061] raid6: sse1x1     861 MB/s
    
  457. [    3.780042] raid6: sse1x2    1397 MB/s
    
  458. [    3.780047] raid6: Using algorithm sse1x2 (1397 MB/s)
    
  459. [    3.796102] md: raid6 personality registered For level 6
    
  460. [    3.796110] md: raid5 personality registered For level 5
    
  461. [    3.796115] md: raid4 personality registered For level 4
    
  462. [    3.812609] md: raid10 personality registered For level 10
    
  463. [    3.897039] md: md0 stopped.
    
  464. [    3.999034] md: md1 stopped.
    
  465. [    4.004764] md: bind<sdb1>
    
  466. [    4.007767] raid1: raid set md1 active With 1 Out of 2 mirrors
    
  467. [    4.007834] md1: detected capacity change from 0 To 1000200036352
    
  468. [    4.013490]  md1: unknown partition table
    
  469. [    4.233817] md: md0 stopped.
    
  470. [    4.340213] kjournald starting.  Commit interval 5 seconds
    
  471. [    4.340239] EXT3-fs: mounted filesystem With ordered Data mode.
    
  472. [    5.883549] udev[318]: starting version 164
    
  473. [    6.799399] processor LNXCPU:00: registered As cooling_device0
    
  474. [    6.805962] Input: Power Button As /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
    
  475. [    6.805986] ACPI: Power Button [pwrb]
    
  476. [    6.807757] Input: Sleep Button As /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
    
  477. [    6.807788] ACPI: Sleep Button [slpb]
    
  478. [    6.808216] Input: Power Button As /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    
  479. [    6.808226] ACPI: Power Button [pwrf]
    
  480. [    6.825073] Input: PC Speaker As /devices/platform/pcspkr/input/input4
    
  481. [    6.864595] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    
  482. [    7.006498] parport_pc 00:04: reported by Plug And Play ACPI
    
  483. [    7.006619] parport0: PC-style at 0x378 (0x778), irq 7 [pcspp,TRISTATE,EPP]
    
  484. [    7.075237] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    
  485. [    7.141578] gameport: NS558 PnP Gameport Is pnp00:05/gameport0, io 0x200, speed 946kHz
    
  486. [    7.171379] NET: Registered protocol family 23
    
  487. [    7.672346] Error: Driver 'pcspkr' is already registered, aborting...
    
  488. [    7.761354] VIA 82xx Audio 0000:00:11.5: PCI Int C -> GSI 10 (level, low) -> IRQ 10
    
  489. [    7.761535] VIA 82xx Audio 0000:00:11.5: setting latency Timer To 64
    
  490. [    8.431279] md: md0 stopped.
    
  491. [    9.100389] EXT3 FS On sde1, internal journal
    
  492. [    9.279748] Loop: module loaded
    
  493. [   10.194418] kjournald starting.  Commit interval 5 seconds
    
  494. [   10.214161] EXT3 FS On md1, internal journal
    
  495. [   10.214175] EXT3-fs: mounted filesystem With ordered Data mode.
    
  496. [   10.294563] kjournald starting.  Commit interval 5 seconds
    
  497. [   10.294586] EXT3-fs warning: maximal mount count reached, running e2fsck Is recommended
    
  498. [   10.294859] EXT3 FS On sdf1, internal journal
    
  499. [   10.294870] EXT3-fs: mounted filesystem With ordered Data mode.
    
  500. [   11.350014] RPC: Registered udp transport module.
    
  501. [   11.350023] RPC: Registered tcp transport module.
    
  502. [   11.350027] RPC: Registered tcp NFSv4.1 backchannel transport module.
    
  503. [   11.426038] Slow work thread pool: Starting up
    
  504. [   11.426162] Slow work thread pool: Ready
    
  505. [   11.426317] FS-Cache: Loaded
    
  506. [   11.501037] FS-Cache: Netfs 'nfs' registered for caching
    
  507. [   11.548190] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    
  508. [   11.802207] r8169: eth0: link up
    
  509. [   13.527218] svc: failed To register lockdv1 RPC service (errno 97).
    
  510. [   13.529646] NFSD: Using /var/lib/nfs/v4recovery As the NFSv4 state recovery directory
    
  511. [   13.551200] NFSD: starting 90-Second grace period
    
  512. [   22.384013] eth0: no IPv6 routers present
    
  513. root@data20:/home/tpm#
    


  1. root@data20:/home/tpm# cat /etc/fstab
    
  2. # /etc/fstab: Static file System information.
    
  3. #
    
  4. # Use 'blkid' to print the universally unique identifier for a
    
  5. # device; This may be used With UUID= As a more robust way To Name devices
    
  6. # that works even If disks are added And removed. See fstab(5).
    
  7. #
    
  8. # <file System> <mount Point>   <Type>  <options>       <dump>  <pass>
    
  9. proc            /proc           proc    defaults        0       0
    
  10. # / was On /dev/sda1 during installation
    
  11. UUID=7f2be9e6-0302-4e71-beb9-25798ad5eb1f /               ext3    errors=remount-ro 0       1
    
  12. # swap was On /dev/sda5 during installation
    
  13. UUID=26791c44-f4bb-407b-819f-5271a8fd3edc none            swap    sw              0       0
    
  14. /dev/scd0       /media/cdrom0   udf,iso9660 user,noauto     0       0
    
  15. /dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0
    
  16. /dev/md0        /media/md0      auto    rw,user         0       0
    
  17. /dev/md1        /media/md1      auto    rw,user         0       0
    
  18. /dev/sdf1       /media/hdc1     auto    rw,user         0       0
    
  19. 
    
  20. root@data20:/home/tpm#
    


  1. Jul  8 16:37:10 data20 kernel: [   70.180491] ata6.00: configured For UDMA/100
    
  2. Jul  8 16:37:10 data20 kernel: [   70.180536] ata6: EH complete
    
  3. Jul  8 16:37:10 data20 kernel: [   70.212394] ata6.00: configured For UDMA/100
    
  4. Jul  8 16:37:10 data20 kernel: [   70.212421] ata6: EH complete
    
  5. Jul  8 16:37:10 data20 kernel: [   70.258893] ata6: hard resetting link
    
  6. Jul  8 16:37:11 data20 kernel: [   70.576061] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    
  7. Jul  8 16:37:11 data20 kernel: [   70.600391] ata6.00: configured For UDMA/100
    
  8. Jul  8 16:37:11 data20 kernel: [   70.600428] ata6: EH complete
    
  9. Jul  8 16:37:11 data20 kernel: [   70.693823] ata6.00: limiting speed To UDMA/66:PIO4
    
  10. Jul  8 16:37:11 data20 kernel: [   70.694266] ata6: hard resetting link
    
  11. Jul  8 16:37:11 data20 kernel: [   71.012037] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    
  12. Jul  8 16:37:11 data20 kernel: [   71.036388] ata6.00: configured For UDMA/66
    
  13. Jul  8 16:37:11 data20 kernel: [   71.036425] ata6: EH complete
    
  14. Jul  8 16:37:11 data20 kernel: [   71.072406] ata6.00: configured For UDMA/66
    
  15. Jul  8 16:37:11 data20 kernel: [   71.072447] ata6: EH complete
    
  16. Jul  8 16:37:42 data20 kernel: [  101.816388] ata6: hard resetting link
    
  17. Jul  8 16:37:42 data20 kernel: [  102.136039] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    
  18. Jul  8 16:37:42 data20 kernel: [  102.160408] ata6.00: configured For UDMA/66
    
  19. Jul  8 16:37:42 data20 kernel: [  102.160445] ata6: EH complete
    
  20. Jul  8 16:37:43 data20 kernel: [  102.653376] ata6: hard resetting link
    
  21. Jul  8 16:37:43 data20 kernel: [  102.972036] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    
  22. Jul  8 16:37:43 data20 kernel: [  102.996387] ata6.00: configured For UDMA/66
    
  23. Jul  8 16:37:43 data20 kernel: [  102.996414] ata6: EH complete
    
  24. Jul  8 16:38:14 data20 kernel: [  133.816380] ata6: hard resetting link
    
  25. Jul  8 16:38:14 data20 kernel: [  134.136041] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    
  26. Jul  8 16:38:14 data20 kernel: [  134.160414] ata6.00: configured For UDMA/66
    
  27. Jul  8 16:38:14 data20 kernel: [  134.160445] ata6: EH complete
    


  1. root@data20:/home/tpm# lspci
    
  2. 00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [apollo KT266/A/333]
    
  3. 00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [apollo KT266/A/333 AGP]
    
  4. 00:07.0 RAID bus controller: Silicon Image, Inc. SiI 3512 [satalink/sataraid] Serial ATA Controller (rev 01)
    
  5. 00:08.0 RAID bus controller: Silicon Image, Inc. SiI 3512 [satalink/sataraid] Serial ATA Controller (rev 01)
    
  6. 00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
    
  7. 00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI To ISA Bridge
    
  8. 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
    
  9. 00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
    
  10. 00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
    
  11. 00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b)
    
  12. 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 10)
    
  13. 01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
    
  14. root@data20:/home/tpm#
    


  1. root@data20:/home/tpm# ls /dev/
    
  2. agpgart          fd       loop1    md                  psaux   sdb   sdf1      tty0   tty17  tty25  tty33  tty41  tty5   tty58  tty9     vcs3   vcsa5
    
  3. block            fd0      loop2    md1                 ptmx    sdb1  shm       tty1   tty18  tty26  tty34  tty42  tty50  tty59  ttyS0    vcs4   vcsa6
    
  4. bsg              full     loop3    mem                 pts     sdc   snapshot  tty10  tty19  tty27  tty35  tty43  tty51  tty6   ttyS1    vcs5   vga_arbiter
    
  5. bus              hpet     loop4    net                 Random  sdc1  snd       tty11  tty2   tty28  tty36  tty44  tty52  tty60  ttyS2    vcs6   xconsole
    
  6. char             initctl  loop5    network_latency     root    sdd   sndstat   tty12  tty20  tty29  tty37  tty45  tty53  tty61  ttyS3    vcsa   zero
    
  7. console          Input    loop6    network_throughput  rtc     sdd1  stderr    tty13  tty21  tty3   tty38  tty46  tty54  tty62  urandom  vcsa1
    
  8. core             kmsg     loop7    null                rtc0    sde   stdin     tty14  tty22  tty30  tty39  tty47  tty55  tty63  vcs      vcsa2
    
  9. cpu_dma_latency  Log      MAKEDEV  port                sda     sde1  stdout    tty15  tty23  tty31  tty4   tty48  tty56  tty7   vcs1     vcsa3
    
  10. disk             loop0    mcelog   ppp                 sda1    sdf   tty       tty16  tty24  tty32  tty40  tty49  tty57  tty8   vcs2     vcsa4
    
  11. root@data20:/home/tpm#
    


  1. root@data20:/home/tpm# cat /proc/mdstat
    
  2. Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
    
  3. md1 : active raid1 sdb1[0]
    
  4.       976757848 blocks super 1.2 [2/1] [u_]
    
  5. 
    
  6. unused devices: <none>
    
  7. root@data20:/home/tpm#